help needed
help needed
can any body suply me with or some info on the seal inside an early front hub behind the speedo drive
-
fizzydoctor
- On the Road & Rocking
- Posts: 755
- Joined: Fri Nov 06, 2009 6:04 pm
- Location: Staffordshire
- Contact:
Re: help needed
Hi Lance,lance wrote:can any body suply me with or some info on the seal inside an early front hub behind the speedo drive
The seal is available from Yamaha on part number 93107-42001 for around £7.00 last time I bought one.
The seal size is OS -42-52.5-7
You have to remove and refit the drive gear to replace the seal.
I am sure Per could order one in for you if you don't have a dealer near by.
Hope this helps
Re: help needed
cheers mate sweated the drive gear off already will order tomorow thanks
-
andyford62
- 16 at last
- Posts: 2
- Joined: Wed Oct 07, 2015 10:52 pm
Re: help needed
Hi Lance,
How did you remove the speedo drive ring ? I was going to try heating it up and use pullers ?
Let me know,
Cheers,
Andy.
How did you remove the speedo drive ring ? I was going to try heating it up and use pullers ?
Let me know,
Cheers,
Andy.
