Can any experts have some final word to help me?...Recently got a '76 DX in very good condition overall...different people are 'advising' different things re 2 stroke oil...I'm using Shell mineral SX2 at 20:1..being told a fully synthetic oil at 30:1 would be better?....gives less smoke better/cleaner running etc....?..
.Also it has a new NGK B8HS plug...which I'm getting different 'opnions' about from people like me who had fizzies in their day!...
I'm not particularly 'mechanical' minded...Can anyone give a definitive opnion(s) ...it's a nice bike with what seems a good engine ...don't want to damage anything!.....any thoughts appreciated!!....Ta in advance..
Mineral or synthetic 2 stroke?...20:1 or weaker?
-
tubsaeng01
- 16 at last
- Posts: 17
- Joined: Tue Jul 06, 2010 8:56 pm
- Location: Waterlooville, Nr. Portsmouth
Mineral or synthetic 2 stroke?...20:1 or weaker?
The 'Ville DX Rider....
Re: Mineral or synthetic 2 stroke?...20:1 or weaker?
i personally use mineral oil at the 20:1 ratio as mr yamaha built the bikes to use as for plug then a b7hs is whats in mine but this is just what i use
Re: Mineral or synthetic 2 stroke?...20:1 or weaker?
I'm running semi-synthetic at 20:1 and B7hs plug.
Don't run at 30:1 ratio
Newer engines may well be designed to run on that ratio, yet not the little fussy fizzy engine; it will run too hot.
I'm not over impressesd with semi-synthetic, next tank of fuel, i'm going to try castrol bog standard mineral.
Don't run at 30:1 ratio
I'm not over impressesd with semi-synthetic, next tank of fuel, i'm going to try castrol bog standard mineral.
-
tubsaeng01
- 16 at last
- Posts: 17
- Joined: Tue Jul 06, 2010 8:56 pm
- Location: Waterlooville, Nr. Portsmouth
Re: Mineral or synthetic 2 stroke?...20:1 or weaker?
Thanks for input...I'll stick with 20:1 mineral and get an NGK B7HS plug....don't know the difference with a B8HS but we'll see!...
The 'Ville DX Rider....
Re: Mineral or synthetic 2 stroke?...20:1 or weaker?
B7HS is a standard plug.
I hope i have this right
It's about heat range: 8 is a cooler plug and 6 would be a hotter plug.
I hope i have this right
It's about heat range: 8 is a cooler plug and 6 would be a hotter plug.
-
pertheswede
- Site Admin
- Posts: 1867
- Joined: Fri Nov 06, 2009 10:46 pm
- Location: Sarf Cheshire
Re: Mineral or synthetic 2 stroke?...20:1 or weaker?
I was told today by the "Fizzy Doctor" that standard as recommended by YAMAHA is always best!
Mineral Oil at 20:1
Mineral Oil at 20:1
1717 Club Members signed up as of 23-09-2025 
Re: Mineral or synthetic 2 stroke?...20:1 or weaker?
Quite correct fizzydoctor, stick to a good brand mineral oil at 20:1 and you won,t go wrong
no matter how hard you ride it 
-
tubsaeng01
- 16 at last
- Posts: 17
- Joined: Tue Jul 06, 2010 8:56 pm
- Location: Waterlooville, Nr. Portsmouth
Re: Mineral or synthetic 2 stroke?...20:1 or weaker?
This board is great!...many thanks again all...that's me sorted....20:1 mineral oil & B7HS plug it is..
The 'Ville DX Rider....
- funkymoped
- On the Road & Rocking
- Posts: 929
- Joined: Wed Nov 04, 2009 1:39 pm
- Location: On my way home from Mars
- Contact:
Re: Mineral or synthetic 2 stroke?...20:1 or weaker?
I know a member who didnt take my advice for using mineral oil at 20-1 and he used synthetic at 30-1 and melted his piston after half a tank a fuel.
I alsways use good old smokey mineral oil at 20-1
I alsways use good old smokey mineral oil at 20-1
I am the phantom Fizzy stripper.
Re: Mineral or synthetic 2 stroke?...20:1 or weaker?
Use Catsrol R
You might hole the piston but you will smell Magnificent
while doing it.

while doing it.
